《4828》1/48 F-2A インテーク[飛行状態](ハセガワ用)
1/48 F-2A Intake (Hasegawa) [flight status](Hasegawa)

こちらの商品は受注生産の為、発送までお時間をいただく場合がございます。 予めご了承ください。

《4828》1/48 F-2A インテーク[飛行状態](ハセガワ用)


1/48 F-2A インテーク[飛行状態]を3Dモデリング+3Dプリントによって制作しました。 貼り合わせ面の処理が難しいインテーク部分を、3Dプリントパーツとすることで処理を不要にしました。 実機の観察と、3Dプリントの成型により、表面のスクリューやパネル接合部、補強板などを再現しています。 解像度の高い8Kプリンタによる出力で、積層痕を低減しました。白いUVレジンで出力することで、インテーク内面や脚庫内の塗装下処理を簡便にしました。(3Dプリントパーツは、プライマーやサフェーサによる下塗りをしなくても、塗装可能です)

2023.01.31 発売予定


Raf Avi.: 4827 1/48 F-2A Intake [mid-flight] for Hasegawa

● Contents
1/48 F-2A intake [ground state] has been produced by 3D modeling + 3D printing.
By making it an integrated 3D printed part, it is no longer necessary to process the seam lines of the intake part, which was very difficult.
Screws on surface, panel joints, reinforcing plates, etc. are reproduced by observing the actual aircraft and molding with 3D printing.
Printed with a high-resolution 8K printer to reduce stacking marks. By printing with white UV resin, the inner surface of the intake and the inside of the foothold can be easily painted. (3D printed parts can be painted without a primer or surfacer undercoat.)

The set includes the following 4 items.

[Intake duct]
Based on researching the actual aircraft, the screw and the joint part of the panel are reproduced on the inner surface. The intake part and the duct part are separate parts, but the joint line can be seen in the actual aircraft, so there is no need to process it.

[Engine fan]
The shape of F110-IHI-129 is reproduced.

[Antenna blade]
On the bottom surface of the antenna blade, the state after relocation from the upper part of the aircraft by supporting air refueling is reproduced.
The parts are divided to make it easier to paint the antenna blade separately and prevent it from being damaged.

[Navigation lights]
Comes with transparent landing light and navigation light parts molded with clear resin.

The details like the piping in the landing gear storage are accurately reproduced.
The product version is printed with white resin, so the inside of the intake is perfect even if you don't paint on it.
In addition, the navigation light is a separate part made of clear resin.

*** The parts in the photos, the white resin parts are product version, and gray resin parts are prototype. The images will be update soon.

3D printed parts.
Release date: Jan.31, 2023
Price : 6,600JPY
    送料無料 【 モデルアート電子書籍版 購入サイト一覧 / Purchase Model Art eBooks 】 モデルアートTwitter 艦船模型スペシャルTwitter モデルアート公式note モデルアート公式note モデルアート公式note 直営店のご案内